Bearing box and the shaft and bearings with the gap.

Bearing box installation:

1,Standard                              

Card board mounting ring and fixed several methods of bearing box.

Screws to install agricultural bearings with bearing jacket cause deformation, should be avoided.

2,flange type

Mounting flange type linear bearings, bearing with them inside the hole with surface accuracy to be precise.

3,adjustable (small open type)

Bearings and bearing boxes with vertical openings can be pre-uniform circumferential direction on the set.

4,large open-type

If the bearing with the appropriate use with large open space can also adjust the bearings, or even add light preload.

5, installation notes

The linear bearing load bearing should be used to provide assistance, to avoid a direct hit end or seals, thrust ball bearings should be used even to import, with a buffer board, with gently tap into.

Penetrate the optical axis linear bearings, shaft and Pressed Bearing must be the center line of a straight line. If the insertion axis tilt, the ball may fall off or cause the cage changed, while the linear bearing damage.

External load should be evenly distributed throughout the bearing, especially in transient load bearing should be used when two or more bearings. Linear bearings do not bear the rotating load, or can lead to accidents.